Flash Point Tester

PT-D93-1002A Semi-automatic Closed-cup flash point tester for petroleum products (Pensky -Martin method)

PT-D93-1002A

PT-D93-1002A semi-automatic closed-cup flash point tester for petroleum products (Pensky-Martins method) conforms to the ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8 mm 2/s (cSt) or more at 37.8°C or 9.5 mm 2/s (cSt) or more at 25°C (77°F)

More details

More info

Overview

PT-D93-1002A semi-automatic closed-cup flash point tester for petroleum products (Pensky-Martins method) conforms to the ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8 mm 2/s (cSt) or more at 37.8°C or 9.5 mm 2/s (cSt) or more at 25°C (77°F), or that contain suspended solids, or have a tendency to form a surface film while under test. Other classification flash points have been established by these departments for liquids using these test methods.

 

Structure

  1. Upper cover with a standard fireball comparator, easy to operate.
  2. Heating with stepless voltage regulator, heating-rate is even.
  3. Stainless steel heater, safe and reliable.
  4. Electrical motor to stir oil sample makes the temperature of oil sample stable and equal .
  5. Remote control to light fire could improve the accuracy in test.
  6. The instrument is designed rationally, has attractive appearance and easy to operate.

 

Technical parameters

1.  Rated voltage: AC220V±10%  50Hz.

2.  Temperature range: 40~300°C.

3.  Heating power: 0~1000W (Continuously adjustable).

4.  stirring way: Motor stirrer, 105r/min.

5.  Ignition gas: Pipeline coal gas, Liquid gas, and gas pressure less than 10Kpa.

6.  Ignition way: Remote control ignition.

7.  Ambient temperature: 20~30°C.     Humidity≤85%.

29 other products you may be interested: