PT-SPB-ND Solidifying Point Constant Temperature Water Bath

Purpose
PT-SPB-ND Solidifying Point Constant Temperature Water Bath is designed and made as per requirements for constant temperature water bath stipulated in the National Standard GB/T510 “Test Methods for Solidifying Point of Petroleum Products”. It is used for sample treatment in the range of room temperature to 60 °C.

Technical characteristics

1. It uses a two layers cylinder, and electric stirrer, so it can keep temperature stable at controlling temperature.
2. It adopts a digital temperature controller, so it is convenient to set temperature with high temperature controlling accuracy.
3. You can put 7 pieces of solidifying point test tubes and 2 pieces of cold filter plugging point test tubes in the bath, so it can keep temperature of 9 pieces of samples constant at a time.
4. Table structure, newly designed, and it is convenient to be operated.

Technical parameters

• Power supply: AC 220V±10%, 50Hz±5%;
• Heating power: two grades, 1000W and 650 W;
• Stirring motor:
• Power: 6 W;
• Speed: 1200 RPM;
• Measurement range: room temperature  ~ 100°C;
• Temperature controlling accuracy: ±0.1°C;
• Constant temperature bath:
• Cubage: 20 L;
• Types: two layers cylinder;
• Working environment:
• Ambient temperature: -10°C ~ 35°C;
• Relative humidity: <85%;
• Temperature sensor: Industrial platinum; scale number is Pt100;
• Total power consumption: not more than 1800 W;
• Dimensions (m): 0.61*0.56*0.76, 0.44*0.44*0.48