Portable Practical Multifunction Phased Array Flaw Detector

Features:
→Phased array, TOFD, A scan three phased array, key switch, more efficient defect verification;
→Small size, light weight, easy to carry, no worries to work in outdoor and high altitude;
→With 32 elements transmit and receive signal synchronously, high integration, better image;
→New flow process operation menu, similar to the conventional A super equipment operating procedure, easy to learn.
→High sensitive touch screen button and jog dial dual-mode operation, more convenient to use;
→Built-in a large number of open work-piece model, defect display intuitive, special-shaped structure analysis is simpler;
(Suitable for Plate weld, “T” type weld, Corner weld, Pipe weld, Forge piece and plates inspection)
→With 60Hz display refresh rate, graphic dynamic effect showing better and faster;
→With whole point TCG/DAC curve compensation function;
→With ACG angle compensation, playback, correction function;
→Dynamic focusing, good focusing performance, making flaw results more accurate;
→With A/B/C/D/S/L/TOFD/3D multi image display function, making flaw analysis more comprehensive;
→With deep gate, sound gate automatic alarm function, making flaw identification more rapidly;
→Support full record of encoder scanning;
→With probe, wedge, parameters, data, reports and other documents classification editing function;
→Automatic print and output inspection report function.

Technical parameters：
→Screen size：8.4 inch 24 elements true color display;
→Data storage：internal 16GB ，external USB storage
→Extended interface：USB2.0×2，100M/1000M LAN×1，VGA×1
→Encoder interface：1pc (support two encoders connection)
→Alarm：1pc
→Working temperature：0-45℃
→Storage temperature:-20℃-65℃
→Power supply：AC220-DC15V AC adaptor，11.1V lithium battery
→Working time：8 hours（one battery-powered）
→Dimension：265×180×75（mm）
→weight：2.7Kg（including battery）

Phased array parameters:
→System bandwidth：0.5-15MHz（-3dB）
→Sampling frequency：100MHz 8bit
→Sampling point：8192
→Sampling average：16
→Active aperture：32 elements
→Sweep wire harness：256
→Repetition frequency：1.0KHz-5.0KHz
→S-scan refresh rate：60Hz
→Delay line in accuracy：2.5ns
→Rectification(s)：Positive, negative, full wave, RF
→Transmit delay：0-20us
→Transmit voltage：50V-200V
→Pulse width：30ns-500ns（step:10ns）
→Pulse type: Negative square wave
→Gain range：Analog:0-80 dB，digital:0-30 dB
→Gain step：Analog: 0.1 dB，digital: 6 dB
→DAC：16 points
→TCG：16 points
→Focus：Transmit: single focus; Receive: dynamic focus
→Image scanning：A/C/D/S/L/3D

TOFD module parameters：
→System bandwidth：0.5-15MHz（-3dB）
→Sampling frequency：100MHz 10bit
→Sampling point：1024 
→Sampling average：16
→Repetition frequency：100Hz-1KHz
→S-scan refresh rate：60Hz
→Rectification(s)：Positive, negative, full wave, RF
→Transmit voltage：50V-350V
→Pulse width：30ns-500ns，（step:10ns）
→Damp match：25Ω-500Ω
→Pulse type：Negative square wave
→Gain：110 dB，minimum adjustment accuracy:0.1dB